Retail Thief Alarm—Double Tags (STA06)
Display unit is for shoplifting prevention
This is high quality product, which have been export to Japan more than 5 years.
Net furniture and tie the cord end portion of the loop. If you press the start button and set the side guard mounted on both sides of the product back to peel off the seal body guard.
Products peel off the body guards, echoes the alarm code , then the alarm sounds resonate.
Cheaper than the cost of introducing anti-shoplifting systems.
So many times you can use interchangeable batteries (internal battery button).
Apply for product: mobile phones, portable CD/MD Player, PDA (mobile device), Shaver, notebook and PC etc.
This product is recommended to prevent shoplifting and theft of Consumer electronic stores.
| |
|
Item No: STA06
Description
① cord
By Carl handling code, retaining the clean image of the product.
②4 wire + peeled off alarm function
Intentionally short code, an alarm sounds and alarm when disconnected.
In addition, an alarm switch activates the built-in sensor unit can peel off from the product itself.
③ High Volume Buzzer (100dB or more)
Without piped music and drown out the noise around the store, immediately inform the theft.
④ No special tools, etc.
An alarm when a warning is lifted, and unlocks special tool is required.
Pens with your existing set, can be lifted.
Specifications
Dimensions: length x width x thick ( 4.3 cm × 1.5 cm × 2.2 cm )
The wire: approx length 37cm, up to 100cm
Alarm Sound: intermittent sound around 100dB or more
Installation: only stick with double sided tape
Using battery: lithium battery (CR1220) 2
Running time: about 1 year installation alert status (condition: no alarm activation) four times for 10 minutes or an alarm
|
|
|
|
|
| Select Image |
 |
|
|
|
|
